Oak, Wooden, Pine & Timber Beam Cleaning
Gentle chemical free stripping and cleaning of Oak, Black, Timber, wooden Beam and Rafters.
Stripping and Restoration of Listed Beams
Are you thinking of cleaning, stripping or sanding some old beams in your property and don’t know how or are worried that you may damage the beams, then look no further.
Do you have painted oak, pine or timber beams?
Have they been painted black, brown or even white?
Are the beams covered in varnish, dirt or smoke damage?
Do you wish you could remove the paint without any damage to the beams and surrounding area?
Look No Further, Cleaning Your Beams is What We Specialise In.
Beam Clean & Restore Limited are specialists in the gentle and chemical free cleaning of beams and much much more.
Using specialist cleaning and stripping equipment Beam Clean & Restore Limited can clean away years of paint, wax, varnish, dirt & grime, smoke damage, mould & more.
The beams in your home may well have been there for a few hundred years, could you imagine how devastated you would be if you tried to remove the paint or varnish yourself using the stripping products found in hardware stores. Not only would you ruin the look of the beams completely but you could potentially damage the delicate timbers of the beam itself. There would be no going back once that had happened and your centuries old beam has now got to be repainted again or worse still replaced to ‘hide’ the damage caused. Instead why not call us at Beam Clean & Restore Limited, we can come and give you a free no obligation quotation and talk you through exactly how we can remove the paint, dirt, varnish or similar from your beams. See our amazing video of how we do this!!
Beams Before & After Cleaning
Just click on an image to see a larger picture
See Our Beam Cleaning Videos
Cleaning beams is a specialised process and our technicians are fully trained and experienced in the cleaning beam process. To clean the beams we gently strip and clean away the paint or similar layer by layer not all at once this makes the cleaning beam process far more precise and allows us to clean the beam in places where there may be thicker paint or varnish.
Beam Clean & Restore Limited use equipment that can be used on a wide range of domestic, listed and industrial premises. Using a cleaning pressure of between 20 – 30 psi, along with the finest and safest media available we can gently lift away paint and more from your beams, layer by layer with no damage to the beam underneath or the surrounding area. It is not, repeat not at all like sandblasting which is used at pressure levels of between 120+ using sand not fine chemical safe medias. Sandblasting will not only remove layers of the delicate timber, oak, pine or brickwork but will also cause untold damage to the surrounding area! Not a good idea at all!
Once our gentle cleaning process is complete you may even be amazed to find age old treasures carved into the beams such as initials, dates, places or names that you never knew were there, hiding underneath that black paint! Yes, our cleaning process is so gentle and effective it will not remove these treasures!! It could even add value to your home! The media that Beam Clean & Restore Limited use is chemical free, eco friendly and non hazardous and safe enough to use even if your property is listed. By cleaning away the black paint or dirt and grime from your beams then your home can be transformed from having rooms that are dark and dreary to having rooms that are light & fresh.
Our system can be used either wet or dry but inside your home Beam Clean & Restore Limited will only use a dry system to eliminate the concerns of moisture damage to your rooms and electrical issues. Don’t be concerned about how much of a mess there will be. Of course any refurbishing work can be disruptive and leave you having to clean up afterwards! At Beam Clean & Restore Limited we pride ourselves on our cleaning methods. We will treat your home with the upmost care and respect it deserves. Before Beam Clean & Restore Limited begin any cleaning of your beams the area will be sealed and covered in heavy duty plastic and all electric and light sockets will be covered. As we progress with the cleaning beam process we will have in place extractor fans and keep windows to the room open where possible to enable the extraction of dust particles.
Once we have cleaned your beams the dirt and plastic will be carefully removed from your home and taken away by us – you don’t have to worry about disposing of any mess! The area will then be thoroughly cleaned and will be ready for you to move your furniture back in and admire your fresh, clean beams! Beam Clean & Restore Limited pride ourselves not only on cleaning and restoration projects but on our cleaning up methods!
Watch our amazing video of how we strip and clean paint from your beams!
Please contact Beam Clean & Restore Limited on 07837 778229 or e mail us on email@example.com to arrange a free and no obligation quotation.
Feel free to attach as many photos as you like to your e mail to help us to see exactly what your clean and restore project is!
We are able to clean many other items inside and outside your home so please have a look at our other pages and photos to see if we can help you to clean and restore other items around your home and garden you never thought you would be able to get clean again and would have to replace!